The circuit design is based upon an LED illuminated high-speed resistor.
This light-sensitive resistor is in fact part of an optical controlled potentiometer rather than a VCA.
The result is absence of any distortion in the gain-controlling device at any compressor/limiter level.
The Tube amplifier does not change gain, and therefor does not change Sound during compression.
Compare it to as the compressors "moving Fader".
The unique developed detection circuit delivers a clean and very fast control voltage to the optical device.
This avoids the often seen problem of many comps, where the compressed low frequencies are "modulated",
especially when fast attack and release times are used.
The benefit therefor is the extremely high linearity and thigh sound also at the lowest compressed frequencies.
The unit is also available with the ELMA 04 gold plated switches for precission stereo setting,
when used in the mixing and mastering process.
One Hand Bypass Operation.
Besides being a Compressor,
the TSC is also a very high quality Tube Amplifier recommended as Recording Input Amplifier.
With its gain range of +/- 15 dB and when the Threshold is set at zero,
the TSC provides the Level Adjustment Facility for many different analog sources before going on track.
The TSC will also with excellent result "Warm Up" on all ready-recorded material.
|Input and Output standard transformer balanced|
|Frequency response 10 Hz / 46 KHz||-1.5 dB|
|Noise floor lower than||-98 dB|
|Distortion lower than||0.03 %|
|Headroom||+ 28 dB|
|Compression 1:1.2 Limiter 1:20|
|Timing Attack||@ Norm||10 ms - 2 sec.|
|Timing Attack||@ Fast||0.4 ms - 1 sec.|
|Timing Release||@ Norm||8 ms - 2.5 sec.|
|Timing Release||@ Fast||1.2 ms - 0.85 sec.|
|Factory set for 115 Volt / 60 Hz or 230 Volt / 50 Hz.|
|Unit weight 7.5 Kg. Shipping weight 10.5 Kg.|